Designing Tools with Linemen’s Requirements in Mind Kelly WilderMarch 16, 2020Home0 Comments 0 Linemen are out on the line all day. More often than not they are on the line and do not have access to any source of power. Yet these linemen need tools to be able to complete their work. Since they don’t have access to any source of power their tools need to have their own source of power. The best tools that these linemen could have are battery-operated tools. That way they could still work without having to worry about having a power source. They could take their tools wherever they needed them and operate them any time they needed them. One of the important tools that a lineman needs on his job is the lineman battery powered cutting tools. A big part of a lineman’s job is cutting, so it is important that a lineman has this tool to use. This is a tool that would get used a lot throughout the workday. Another aspect of battery-operated tools that researchers found was that they need to be ergonomic. Researchers have found that using the tools a lot caused carpal tunnel syndrome and cumulative trauma disorder. This cost the company millions of dollars in worker compensation claims as more and more workers were suffering from one or the other. Manufacturers then found that they needed to make a tool that was ergonomic. Since these workers use these tools for long periods of time. They needed an ergonomic tool that was not going to cause carpal tunnel syndrome or cumulative trauma disorder. There were a lot of benefits to using ergonomic tools. There was no muscle strain, overreaching, awkward positioning, exertion, or sudden jarring of the body. Simply choosing an ergonomic design of those tools would prevent those things from happening. For the ergonomic tool to work as it should, it must fit the hand as specifically possible. That way the pressure is distributed evenly over the entire palm of the hand. The tool must feel comfortable in the hand. That way the tool will minimize hand and arm vibration, as well as reduce repetitive motion and any awkward positions. All of these are benefits of a tool that fits properly with a specific worker. The biggest benefit comes when the tool fits a specific worker. The tools come in various sizes and weights. Since these tools do come in various sizes and weights there should be one that would fit each worker. It is up to the worker to see which size and weight he or she is most comfortable with. Once that work has found the tools that they are comfortable with using and do not cause strain, that lineman should be able to do his or her job without any physical strains whatsoever. It will make the job safer and easier to perform by any lineman. Then, of course, there is the manual tool versus a battery-operated one. Manual tools again cause all sorts of strain as the lineman needs to cut the lines manually. When using a lineman battery powered cutting tools to cut lines it makes it much easier. The lineman does not have the strain of manually cutting the line. They can use the battery powered cutting tools and it is much faster. Since it is battery powered there is no strain involved as the battery powered cutter is doing all the work. There is no need to have to cut the lines manually again. Tools have come a long way. In the early days when everything had to be done manually, there were a lot more injuries involved. Now that the tools are battery operated, a lineman’s job is much easier and more efficient.